PRODUCT

Professional design, development and production of digital encoder, electronic switch and high and low voltage connector

Home page

Mouse switch

3D Bending extruded copper bar（T2）

3D Bending extruded copper bar（T2）

3D Bending Extruded Copper Bar (T2)

Information

Material Code

ZPAA3A7-xxxx

Conductor material

T2 Red copper

Coating layer

Nickel plating2-6μm

Insulating layer

PA12

Insulation thickness

0.5-1mm

Processing method

Extrusion molding、3D Bending

Features

Large current carrying, high conductivity, 3D bending molding using automatic production line for copper bar processing, according to customer requirements to produce a variety of specifications, complex shape of high conductivity connected copper bars, and for drilling, bending, etc.

Performance introduction

Insulation and voltage resistance

2700V DC，1min，leak current＜1mA，1000V DC，1min，Minimum resistance≥500 megohm

salt mist

Continuous salt mist96h，corrosion-proof grade：9 / 9 s A B C D E and above

fireproofing, antiflaming

VW-1

Insulating layer thermal ageing

158℃，continuous 168h、Still meet the insulation pressure 158℃，continuous 168h、Still meet the insulation pressure

Abrasive resistance

Still meet the insulation pressure

Temperature shock

Low temperature -40℃±3℃，high temperature 125℃±3℃，Temperature preservation per 1h，The temperature is changed within 30s，Circulation 300 times，After cycling, stand in normal temperature and humid environment 4h，Meet the insulation pressure

Low temperature resistant

Low temperature -40℃±2℃，Storage time is 48h，Remove the sample from the warm chamber and make it at（25±5）℃ store 1h

Resistance to moisture and heat aging

85% humidity，under 85℃ 200h

Existing specification

Thickness 2-5mm、width 15-20mm combination