PRODUCT

Professional design, development and production of digital encoder, electronic switch and high and low voltage connector

Home page

Mouse switch

3D bending extruded 6-series aluminum strip with nickel sheet

3D bending extruded 6-series aluminum strip with nickel sheet

Information

Material Code

ZPAA4A7-xxxx

Conductor material

AL 6101

Nickel sheet specification

thickness：0.1/0.2mm

Nickel chip stripping force

8N/mm

Insulating layer

PA12、heat shrink tubing

Insulation thickness

0.5-1,5mm

Processing method

Extrusion molding、3D Bending、Polymer welded nickel chip

Features

High current-carrying capacity、High conductivity、3D bending molding、Lose weight

Existing specification

Thickness 2-5.2mm、 width 15-22mm组合

Performance introduction

Insulation and voltage resistance

2700V DC，1min，leak current＜1mA，1000V DC，1min，Minimum resistance ≥500 megohm

salt mist

Continuous salt mist 96h，corrosion-proof grade：9 / 9 s A B C D E and above

fireproofing, antiflaming

VW-1

Insulating layer thermal ageing

158℃，continuous 168h、Still meet the insulation pressure

Abrasive resistance

Still meet the insulation pressure

Temperature shock

Low temperature-40℃±3℃，high temperature 125℃±3℃，Temperature preservation per 1h，The temperature is changed within 30s，Circulation 300 times，After cycling, stand in normal temperature and humid environment 4h，Meet the insulation pressure

Low temperature resistant

Low temperature-40℃±2℃，Storage time is 48h，Remove the sample from the warm chamber and make it at（25±5）℃ store 1h

Resistance to moisture and heat aging

85% humidity，under 85℃ 200h

Existing specification

Thickness 2-5mm、width 15-22mm combination，customized